0.125" OD x 0.014" Wall Round Aluminum Tube 3003-H14 36" Long
This aluminum tube features an outer diameter of 0.125 inches, a wall thickness of 0.014 inches, and a length of 36 inches, made from 3003-H14 aluminum alloy. Its stable physical characteristics make it suitable for high-demand industrial applications, such as piping, framing, and supports, capable of withstanding certain pressures and loads.
0.125" OD x 0.014" Wall Round Aluminum Tube 3003-H14 36" Long Specifications
| Specification | Details |
| Outer Diameter | 0.125" (3.175mm) |
| Wall Thickness | 0.014" |
| Length | 36" (914.4mm) |
| Material | Aluminum |
| Form | round tube |
| Alloy Type | 3003 |
| Max Length | 72 inches (6 feet) |
| Temper | H14 |
0.125" OD x 0.014" Wall Round Aluminum Tube 3003-H14 36" Long Features and Applications
Features: Larger outer diameter increases material strength and stability, suitable for medium load applications.
Applications: Can be used for automotive parts, mechanical structures, decorative uses, etc.
Aluminum round tubes of different specifications are targeted at different application requirements and can provide corresponding strength, rigidity and precision, suitable for a variety of industrial and light structural environments.
Select length below or Custom Cut
- 12" (1 ft.)
- 24" (2 ft.)
- 36" (3 ft.)
- 48" (4 ft.)
- 72" (6 ft.)
- Custom cuts supported
3003 H14 Aluminum Mechanical Properties
| Alloy | Temper | Wall thickness mm | Longitudinal tensile mechanical properties at room temperature | ||||
| Tension strength Rm N/mm² | Yield strength R p0.2 N/mm² | Elongation after break/% | |||||
| Full section specimen | other samples | ||||||
| A50 mm | A50 mm | Aa | |||||
| Not less than | |||||||
| 3003 | O | All | 95-130 | 35 | - | 20 | 25 |
| H14 | All | 130-165 | 110 | - | 4 | 6 | |
Chemistry Information 3003 Aluminum
| Element | Composition (%) |
| Si | 0.60 |
| Fe | 0.70 |
| Cu | 0.05-0.20 |
| Mn | 1.0-1.50 |
| Mg | - |
| Cr | - |
| Ni | - |
| Zn | 0.10 |
| Ti | - |
| Al | Remainder |