0.15625" OD x 0.014" Wall Round Aluminum Tube 3003-H14 12" Long

This aluminum tube features an outer diameter of 0.15625 inches, a wall thickness of 0.014 inches, and a length of 12 inches, made from 3003-H14 aluminum alloy. The larger outer diameter provides additional strength and stability, making it suitable for structural applications or situations requiring a certain load-bearing capacity.

Measurement Diagram of Aluminum Round Tube

0.15625" OD x 0.014" Wall Round Aluminum Tube 3003-H14 12" Long Specifications

Specification	Details
Outer Diameter	0.15625" (3.96875mm)
Wall Thickness	0.014"
Length	12" (304.8mm)
Material	Aluminum
Form	round tube
Alloy Type	3003
Max Length	72 inches (6 feet)
Temper	H14

0.15625" OD x 0.014" Wall Round Aluminum Tube 3003-H14 12" Long Features and Applications

Features: Larger outer diameter increases load-bearing capacity, suitable for applications requiring higher strength.

Applications: Suitable for electrical component enclosures, support frames, precision mechanical parts, etc.

Aluminum round tubes of different specifications are targeted at different application requirements and can provide corresponding strength, rigidity and precision, suitable for a variety of industrial and light structural environments.

Select length below or Custom Cut

12" (1 ft.)
24" (2 ft.)
36" (3 ft.)
48" (4 ft.)
72" (6 ft.)
Custom cuts supported

3003 H14 Aluminum Mechanical Properties

Alloy	Temper	Wall thickness mm	Longitudinal tensile mechanical properties at room temperature
			Tension strength Rm N/mm²	Yield strength R p0.2 N/mm²	Elongation after break/%
					Full section specimen	other samples
					A50 mm	A50 mm	Aa
			Not less than
3003	O	All	95-130	35	-	20	25
	H14	All	130-165	110	-	4	6

Chemistry Information 3003 Aluminum

Element	Composition (%)
Si	0.60
Fe	0.70
Cu	0.05-0.20
Mn	1.0-1.50
Mg	-
Cr	-
Ni	-
Zn	0.10
Ti	-
Al	Remainder