0.375" Aluminum Square Bar 6061-T6511-Extruded

The 0.375-inch aluminum square bar, crafted from 6061-T6511 alloy, combines strength with versatility. Its extruded design provides consistent dimensions and surface integrity, making it suitable for structural and fabrication projects where durability is essential.

Size: 0.375 inches x 0.375 inches
Material: 6061-T6511 (Extruded)
Applications: Suitable for small to medium-sized structural parts, frames, and fixtures requiring a balance of strength and lightweight characteristics.

This material meets the following specs: AMS -QQ-A-200/8, ASTM -B221

0.375" Aluminum Square Bar 6061-T6511-Extruded Specifications

Specification	Details
Edge Length	0.375" (approximately 9.525 mm)
Height	0.375"
Width	0.375"
Maximum Length	144 inches (12 feet)
Material	Aluminum
Shape	Square Bar
Alloy Type	6061
Temper	T6511
Production Method	Extruded

Select length below or Custom Cut

12" (1 ft.)
24" (2 ft.)
36" (3 ft.)
48" (4 ft.)
72" (6 ft.)
96" (8 ft.)
144" (12 ft.)
Custom cuts supported

6061 T6511 Aluminum Mechanical Properties

Property	Value
Ultimate Tensile Strength KSI	42
Density g/cm^3	3
Yield Tensile Strength KSI	40
Brinell Hardness 500 kg load	93
Melting Point °F	1080 - 1205
Elongation % in 2 in.	9
Rockwell Hardness B Scale	59
Machinability %	50
Shear Strength KSI	25
Electrical Conductivity % IACS	43

Chemistry Information 6061 Aluminum

Weight %	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Each	Total
Minimum	0.40		0.15		0.80	0.04
Maximum	0.80	0.70	0.40	0.15	1.20	0.35	0.25	0.15	0.05	0.15