1. Home
  2. > Stock
  3. > 0.75" Aluminum Round Bar 7075-T651-Cold Finish

0.75" Aluminum Round Bar 7075-T651-Cold Finish

This 0.75-inch diameter 7075-T651 round bar is suitable for lightweight structural parts and high-strength components, widely used in aerospace and industrial fields.

  • Diameter: 0.75 inches
  • Material: 7075 aluminum alloy, T651 heat-treated
  • Features: High strength, suitable for aerospace and engineering applications.

Material Meets These Standard(s): ASTM-B211, AMS-QQ-A-225/9, AMS-4123

0.75" Aluminum Round Bar 7075-T651-Cold Finish Specifications

Specification Details
Diameter 0.75 inches
Maximum Length 96 inches (8 feet)
Material Aluminum
Shape Bar-Round
Alloy Type 7075
Temper T651
Production Method Cold Finished

Select length below or Custom Cut

  • 12" (1 ft.)
  • 24" (2 ft.)
  • 36" (3 ft.)
  • 48" (4 ft.)
  • 72" (6 ft.)
  • 96" (8 ft.)
  • Custom cuts supported

7075 T651 Aluminum Mechanical Properties

Property Value
Density g/cm^3 3
Ultimate Tensile Strength KSI 80
Yield Tensile Strength KSI 67
Brinell Hardness 500 kg load 150
Elongation % in 2 in. 8
Melting Point °F 890 - 1180
Electrical Conductivity % IACS 33
Machinability % 70
Shear Strength KSI 48
Rockwell Hardness B Scale 87

Chemistry Information 7075 Aluminum

Alloy Si Fe Cu Mn Mg Cr Zn Ti Otders-Each Otders Total Al
7075 0.40 0.50 1.2-2.0 0.30 2.1-2.9 0.18-0.28 5.1-6.1 0.20 0.05 0.15 Remainder

You May Also Need

Users viewing this material also viewed the following

Follow us

E-mail:info@alu-sheet-coil.com