2.5" Aluminum Round Bar 7075-T7351-Cold Finish

This 2.5-inch diameter 7075 aluminum alloy round bar is suitable for aircraft fuselage frames, engine mounts, and other high-load applications, maintaining good structural stability even under harsh conditions.

Diameter: 2.5 inches
Material: 7075 aluminum alloy, T7351 heat-treated
Features: Suitable for manufacturing components requiring high strength and stiffness.

Material Meets These Standard(s): ASTM-B211, AMS-QQ-A-225/9, AMS-4124

2.5" Aluminum Round Bar 7075-T7351-Cold Finish Specifications

Specification	Details
Diameter	2.5 inches
Maximum Length	192 inches
Material	Aluminum
Shape	Bar-Round
Alloy Type	7075
Temper	T7351
Production Method	Cold Finished

Select length below or Custom Cut

12" (1 ft.)
24" (2 ft.)
36" (3 ft.)
48" (4 ft.)
60" (5 ft.)
72" (6 ft.)
Custom cuts supported

7075 T7351 Aluminum Mechanical Properties

Property	Value
Density g/cm^3	3
Yield Tensile Strength KSI	63
Ultimate Tensile Strength KSI	73
Brinell Hardness 500 kg load	135
Rockwell Hardness B Scale	82
Elongation % in 2 in.	8
Melting Point °F	890 - 1180
Shear Strength KSI	44
Machinability %	70
Electrical Conductivity % IACS	33

Chemistry Information 7075 Aluminum

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Otders-Each	Otders Total	Al
7075	0.40	0.50	1.2-2.0	0.30	2.1-2.9	0.18-0.28	5.1-6.1	0.20	0.05	0.15	Remainder