1. Home
  2. > Stock
  3. > 5" Aluminum Square Bar 6061-T6511-Extruded

5" Aluminum Square Bar 6061-T6511-Extruded

This 5-inch extruded aluminum square bar is manufactured from 6061-T6511 alloy, providing excellent resistance to corrosion and high strength. It is perfect for demanding applications in construction and fabrication.

  • Alloy: 6061-T6511
  • Size: 5" x 5"
  • Form: Extruded
  • Characteristics: Good strength-to-weight ratio, corrosion-resistant, and versatile for machining
  • Applications: Structural frames, large support components in aerospace and industrial sectors

This material meets the following specs: AMS -QQ-A-200/8, ASTM -B221

5" Aluminum Square Bar 6061-T6511-Extruded Specifications

Specification Details
Edge Length 5" (approximately 127 mm)
Height 5"
Width 5"
Maximum Length 144 inches (12 feet)
Material Aluminum
Shape Square Bar
Alloy Type 6061
Temper T6511
Production Method Extruded

Select length below or Custom Cut

  • 12" (1 ft.)
  • 24" (2 ft.)
  • 36" (3 ft.)
  • 48" (4 ft.)
  • 72" (6 ft.)
  • 96" (8 ft.)
  • 144" (12 ft.)
  • Custom cuts supported

6061 T6511 Aluminum Mechanical Properties

Property Value
Ultimate Tensile Strength KSI 42
Density g/cm^3 3
Yield Tensile Strength KSI 40
Brinell Hardness 500 kg load 93
Melting Point °F 1080 - 1205
Elongation % in 2 in. 9
Rockwell Hardness B Scale 59
Machinability % 50
Shear Strength KSI 25
Electrical Conductivity % IACS 43

Chemistry Information 6061 Aluminum

Weight % Si Fe Cu Mn Mg Cr Zn Ti Each Total
Minimum 0.40 0.15 0.80 0.04
Maximum 0.80 0.70 0.40 0.15 1.20 0.35 0.25 0.15 0.05 0.15

You May Also Need

Users viewing this material also viewed the following

Follow us

E-mail:info@alu-sheet-coil.com